Sheet Stretching Hydraulic Press 160T Kitchenware Punching Press
sell mechancial press machine,hydraulic press, single column press
The main structural features:
1. The fuselage adopts Q235B, adopts submerged arc welding, and is
processed by vibration
after welding to ensure that the body is not deformed.
2. The machine is equipped with an independent hydraulic and
electrical control system.
It adopts button centralized control and can realize both fixed and
constant pressure forming processes.
It has functions such as pressure display, stroke, and pressure
3.200 tons single column hydraulic press, pressure system is
located in the fuselage,
beautiful appearance, easy to operate.
4. Can be designed for head type correction, with four-column guide
column guide to improve
product accuracy, and the column, piston rod after quenching copper
and hard chromium, to ensure
the surface of the wear resistance and high roughness, oil pumping
The oil port is equipped
with a unique filter device to ensure the service life of the oil
pump and valve. The connection
of the oil circuit adopts imported high pressure hose, which
greatly reduces machine noise.
In addition, advanced components such as imported PLC, grating
protection, and man-machine
interface (touch screen) can be configured according to user
requirements. For the special requirements
of customers, we can design and manufacture specifically to meet
the customers' production process requirements to the maximum
The single-column hydraulic press can be customized according to
such as the size of the table of the hydraulic press, the length of
the stroke, the height of the opening,
the working pressure, the running speed, the automatic loading and
unloading, and the automatic/semi-automatic. Tailor-made
high-quality hydraulic press equipment to meet customer's
production process requirements
Requirement of the operation:
The hydraulic machine of production and processing has the
characteristics of rigid structure,
good guide performance and fast speed. Convenient adjusting
mechanism can be adjusted
manually on the head or the workbench in the suppression of any
position, also can be adjusted
within the design schedule any fast forward and on the length of
the process, the hydraulic press
is a simple easy to operate but also should be in accordance with
the requirements for the following operations:
1. The operator of the 200-ton single column hydraulic press must
be trained to master the
equipment performance and operation technology before it can
2. Before the operation, clean all kinds of debris on the mold and
clean any dirt on the hydraulic
3. The hydraulic press installation mould must be carried out in
the case of power failure.
The collision start button, handle and pedal on the foot switch are
4. Install the upper and lower mould pairs, adjust the gap between
the dies, and do not allow
the unilateral deviation from the center, confirm that the mold can
be retested after fixed.
5, hydraulic press work before the first boot device idle for 5
minutes, at the same time check
the tank oil level, oil pump enough sound is normal, hydraulic unit
and the pipes, fittings, if there
is a leak phenomenon piston.
6. Start the equipment test, check whether the pressure is up to
the working pressure, whether
the equipment operation is normal and reliable, and whether there
7. Adjust the working pressure, but should not exceed 90% of the
rated pressure of the equipment,
test one piece of workpiece, and re-produce after inspection.
8. For different hydraulic press profiles and workpieces, the
pressure and pressure of the press
should be adjusted at any time, and the number and time of pressure
and pressure should
be adjusted, and the mould and workpiece shall not be damaged.
9. When the body press is sliding up and down, it is strictly
forbidden to insert the hand and
head into the pressing plate and the working part of the mold.
10. It is strictly forbidden to knock, stretch, weld, bend and
twist the work in the same time.
11. No smoking, welding, welding or fire shall be allowed in the
vicinity of hydraulic press, and no inflammable or explosive
materials shall be stored. Fire prevention measures.
12. When the hydraulic press is finished, the power should be cut
off, the hydraulic rod of the
press should be cleaned, the lubricating oil should be added, and
the mould and workpiece
should be cleaned and put in order.
|Max. pressure of liquid||MPa||25||25||25||25||25||25||25||25|
|Stroke of slide||mm||300||350||350||400||400||500||500||800|
|The height from the worktable to the floor||mm||710||710||710||600||600||650||650||1400|
Packing & shipping:
PVC film covered hydraulic press
Whole machine fixed in the container with steel rope,very safe
Wooden case or pallet or iron box
If have stock,can provide right now
If no stock,small machine delivery time 7-15days.Big machine
delivery time 25-40days.
Can give destination port best price or cost to the customer
All machines have been tested by 48 hours before ship out.
All products have 2 year warranty.
Supported 24 hours online service. If any problems happen, our team
will do our
best to solve the problems.
If any component is damaged during guarantee time. we can send the
the customer by DHL freely
MOQ: We can supply you the quantity you want.
OEM: We can produce the goods as per the customer requirement.
Service: We are much more concern for the on time delviery & quality
More information please contact us:
single column hydraulic press machine 100T, press bears of the
motor and the shaft on the mtor